LED wall washer light is a kind of lighting equipment with high brightness, rich colour and durability, the following will detail the installation process of LED wall washer light.

Firstly, preparation. Before the LED wall washer light installation, you need to prepare the required tools and materials, such as screwdrivers, drills, expansion screws, wires and so on. At the same time, it is also necessary to prepare the wall, including cleaning the wall, determining the installation location, measuring the size and so on.

Next, install the brackets and fixtures. Determine the mounting position according to the design requirements and wall condition, and fix the brackets and fixtures with electric drill and expansion screws. Make sure the brackets and fixtures are firm and reliable to support the weight of the LED wall washer light.

Then, wire and connect. Route the wires through the wall wash light and cut them short or extend them as needed. Use a screwdriver to make terminal connections, ensuring a strong connection and electrical safety of the wires.

Next, install the LED wall wash light. Place the LED wall washer light on the mounting bracket and secure it using a screwdriver. Pay attention to adjusting the angle and position of the wall washer light during the fixing process so that it can achieve the desired lighting effect.

Debugging and testing. Connect the power supply to the LED wall washer light and switch on the power switch. Observe whether the brightness and colour of the LED wall washer light meets the design requirements, and at the same time check whether the wall washer light operates normally. If problems are found, they should be debugged and dealt with in time.